S1-1468-120P US Motor, Blower, 1/4HP, 208/230Vac, Single Phase, 1050 RPM, 3 Speed, 1.5 Amps, 42Y NEMA Frame Size, 5" diameter Open Drip Proof Enclosure, Self Aligning Ball Bearing, Ring or Stud Mount, 1/2" Shaft, Reversible Rotation, Permanent Split Capacitor Motor

Coleman 1468-120P Use Low Speed on (Heat only 800 cfm) 

Note: This motor uses motor mount bracket S1-37319806100 for 5" motor

1/4HP, 208/230Vac, Single Phase, 1050 RPM, 3 Speed, 1.5 Amps, 42Y NEMA Frame Size, Open Drip Proof Enclosure, Self Aligning Ball Bearing, Ring or Stud Mount, 1/2" Shaft, Reversible Rotation, Permanent Split Capacitor Motor. 

Motor Uses a 7.5 mfd 370V run capacitor (part # POCF7-5A) not included 

When ordering this upgraded motor for the Coleman furnaces you need to order a capacitor POCF7-5A 

Wireing- This is a 3 speed motor now so this motor for Heat only application or 800cfm use low speed, cust cap off the 2 speeds you don't want to use, Zip tie or tape up loose wires 

Replaces Part Number 3400A311, 1468-120P, 322P249, E322P249, E46993

Coleman 1/7 hp 2-speed blower motor. 230V, 60Hz, 2.5-2.4 amps, 600-1060 RPM.  run capacitor required ( 7.5 Microfarad 370Vac Oval Run Capacitor) 1/2" x 2-7/8" shaft. Housing is 5" diameter x 3.5" deep. Molex pins crimped onto the end of the wires. Shaft rotates counter clockwise when viewing from the back end of the motor. Pins then snap inside a Molex male plug. Order a replacement plug here.  Fits many furnaces in the 3100A and 3100B series (but not the 3100).

Replaces the following motors: 3115-3129, 3115-312, 3118B3129, 3118B312, 3118C3129, 3118C312, 3110B3119, 3110B311, 3115A3119, 3115A311, 3118A3129, 3118A312, 3118-3129, 3118-312, 3110-3119 & 3110-311. Fasco 71513769, Westinghouse E322P250

WIRE DIAGRAM 

• Brown/white one leg of the capacitor.

   

  
  

• Brown= other leg of capacitor

• Red= Low fan Speed

• Blue=Med 

• Black= High 

• Orange / Yellow wires

  Change rotation direction

  
  

   

   

Product Specifications