S1-1468-120P , Blower Motor, 1/4HP, 230Vac, Single Phase, 1050 RPM, CW, 1391 5"
S1-1468-120P US Motor, Blower, 1/4HP, 230Vac, Single Phase, 1050 RPM, CW, with 1 year warranty.
Coleman 1468-120P (Heat only Low speed 800cfm)
Note: This motor uses motor mount bracket S1-37319806100 Needed for this upgraded motor when replacing the older Coleman model numbers
Due to the US department of energy changing the efficiency of the electric motors
the past few years the motor requires a different motor mounting bracket as the motor size has changed.
1/4HP, 208/230Vac, Single Phase, 1050 RPM, 3 Speed, 1.5 Amps, 42Y NEMA Frame Size, Open Drip Proof Enclosure, Self Aligning Ball Bearing, Ring or Stud Mount, 1/2" Shaft, Reversible Rotation, Permanent Split Capacitor Motor.
Motor Uses a 7.5 mfd 370V run capacitor (part # POCF7-5A) not included
When ordering this upgraded motor for the Coleman furnaces you need to order the new motor mount bracket S1-37319806100 and capacitor POCF7-5A
Wireing- This is a 3 speed motor now so this motor for Heat only application or 800cfm use low speed, cust cap off the 2 speeds you dont want to use, Zip tie or tape up loose wires
Replaces Part Number 3400A311, 1468-120P, 322P249, E322P249, E46993
Product Specifications
| A | 4" |
|---|---|
| Agency Certification | UR/CSA |
| Ambient Operating Temp. (Celsius) | 40 |
| Bearing Type | SAB |
| Capacitor to Match | 7.5 oval 370 |
| Diameter | 5" |
| Efficiency | 62% |
| Enclosure | OAO |
| F/L Amps | 1.50 |
| HP | 1/4 |
| Hz | 60 |
| Insulation Class | B |
| Mounting | Hub ring |
| NEMA Frame | 42 |
| Phase | 1 |
| RPM | 1050 |
| Rot. | Rev. |
| Service Factor | 1.00 |
| Shaft Diam. | 1/2" |
| Shaft Length | 4" |
| Speeds | 3 |
| Std. Mount. Pos. | Horizontal |
| Thermal Protection | Auto |
| Type | PSC |
| Volts | 208-230 |
| Wt. Lbs. | 13.0 |