This is a new substitute for the original 1/12hp motor which is no longer available. 1/10hp 1-speed Nordyne blower motor. Rotation is counter clockwise when looking from the back of the motor (CCWLE). 115V, 1050 RPM, 2 oil ports, 3.38 amps, shaft size is 1/2" x 2-3/4", housing is 5" diameter x 3.25". 2 black wires. Flat 3-leg mounting bracket. If angle mounting is required, use motor 901621.
Used on the following heat-only furnaces built prior to July of 1985: MGH-045, MGB-045, MAC-1145, MGH-055, MGB-055 & MAC-1155. Also found on some MG series furnaces such as the MG055A.
Replaces 620164, 6201640, 620-1640, 620-8180, 6208180, 620818, 901373 & 9013730. For units with a/c, look at motor # 620699.