Cart 0
4614-Y8

4614-Y8

  • Save $ 17.28
Shipping calculated at checkout.
 More payment options
Order within the next 0 Day(s), 13 hours, 49 minutes, 10 seconds for estimated USPS delivery by Thursday, 04/10 - Monday, 04/14 If you need it quicker order UPS 2nd day or Next day air! No Next Day Air Saturday Delivery (Order Friday Receive Monday)
10-14 Apr Estimated arrival
United States
07 Apr Order placed
08 Apr Order dispatches
10-14 Apr Delivered!

Checkout securely with

MICRO-PLUS 16 

Description:

More than a filter, more than a feeder, Micro Plus is the complete treatment program for commercial ice makers, coffee urns and brewers, beverage machines and other water-using equipment such as humidifiers, steamers and residential refrigerator ice makers.

Micro-Plus Treatment Systems are available in a variety of size capacities, from the Micro-Plus 2, which can be used on equipment using up to 12.5 gallons of water per day, to the Micro-Plus 16 for treating up to 100 gallons of water per day. Micro-Plus systems are designed and manufactured to eliminate or control the three primary water-related problems: lime scale, silt and sediment, and objectionable tastes and odors encountered in ice makers, coffee urns and other equipment. These problems all reduce the designed capacities of this equipment, and they cause operation and service costs to increase.

Packaging Size Part Number Additional Info
Micro-Plus 2 4615-W3
Micro-Plus 4 4612-W3
Micro-Plus 8 4613-Y8
Micro-Plus 16 4614-Y8

Directions:

General Installation/Operation Condition

  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
  • Installation must comply with state and local laws and regulations.
  • Filters may be installed in any convenient location.
  • Be sure to keep filters away from any heat source.
  • Filters must be changed every six months or when capacity expires, whichever comes first.
  • The standard period for storage and preservation of filter products is one year. This is simply a precaution, as under normal conditions these filters should last indefinitely.

Installation Steps

  1. Shut off water.
  2. Disconnect existing filter or cut water line where filter is to be installed.
  3. Install compression or flare fittings, or “Quick Connect” fittings.
  4. Use thread tape or equivalent where appropriate.
  5. Insure proper direction of water flow and connect inlet. USE TWO WRENCHES.
  6. Flush 5-6 gallons of water to drain as described above.
  7. Turn off water and connect outlet. USE TWO WRENCHES.
  8. Carefully turn on the water and check for leaks.
  9. Check the filter after approximately 8 hours for slight leaks not visible during initial installation.