3118C312P Blower Motor 230V 2-speed 1/6-1/8 hp 5" CW = 26-429
26-429 is the direct replacement for the 3118C312P, D318 Blower motor
Description
1/5-1/6-1/8HP, 208-230 Vac, Single Phase, 1050 RPM, 3 Speed, 3.4-2.7-2.2 Amps, 42Y Nema Frame Size, Open Air, Sleeve Bearing, 1/2" x 3 3/4" Shaft, CCW Lead End Rotation, Shaded Pole Motor
Century 429 Fan & Blower Motor 1050 RPM 3 Speed 208-230 Volts
Black - High Speed, Blue - Med Speed, Red - Low Speed, White - Common
KEY FEATURES
- Furnace Blower - Attic Ventilator - Air Handler - Fan Coil Motor
- 5" Diameter - 42 Frame
- Shaded Pole
- Thermally Protected
- Open Air Over
- Class A Insulation, 40°C Ambient
- Sleeve Bearing
- 1/2" Diameter Shaft with Flat
- 30" Leads
- Extended Studs Shaft End, Resilient Ring Mounting
General Specifications
| UPC: | 786674007025 | Weight: | 11.00 LB |
| Packaged Length: | 11 IN | Packaged Width: | 7.5 IN |
| Packaged Height: | 7 IN | HTC: | 8501.40.4040 |
| Country of Origin: | Mexico |
Nameplate Specifications
| Output HP: | 1/5-1/6-1/8 Hp | Output KW: | 0.15 kW |
| Frequency: | 60 Hz | Voltage: | 208-230 V |
| Current: | 3.4 A | Speed: | 1050 rpm |
| Service Factor: | 1 | Phase: | 1 |
| Duty: | Continuous Air Over | Insulation Class: | A |
| Frame: | 42Y | Enclosure: | Open Air Over |
| Thermal Protection: | Automatic | Ambient Temperature: | 40 °C |
| UL: | Recognized | CSA: | Y |
| CE: | N | Number of Speeds: | 3 |
Technical Specifications
| Electrical Type: | Shaded Pole | Starting Method: | Across The Line |
| Poles: | 6 | Rotation: | Clockwise Shaft End |
| Mounting: | Resilient Rings | Motor Orientation: | Horizontal |
| Drive End Bearing: | Sleeve | Opp Drive End Bearing: | Sleeve |
| Frame Material: | Rolled Steel | Shaft Type: | Flat |
| Overall Length: | 7.84 in | Frame Length: | 3.42 in |
| Shaft Diameter: | 0.500 in | Shaft Extension: | 3.84 in |
Old D318
5" shaded pole 2-speed blower motor. Rotates clockwise (CWSE) when viewing from shaft end. No run capacitor required.
Wiring: white - common, black - high, red - low, green - ground.
1/6-1/8 horsepower
2 Speeds
230 Volts
3.10-2.20 Amps
CWSE Rotation
1050 RPM
Sleeve Bearings
5 inch diameter (42 frame)
Open Enclosure
Mounting with 3 studs or optional belly-band
Service Factor 1.00
1/2" shaft diameter
3-1/2" Shaft Length
1 Shaft
Shaded Pole
Automatic Overload
Phase 1
60 Hertz
4 inches length (less shaft)